-23%
D2 Turbo 240V, 250 Kgs
Original price was: $950.00.$730.00Current price is: $730.00.
Prepare for your sliding gate to be turbocharged. The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 400 millimeters per second and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a standard, domestic four-meter gate.
MAIN FEATURES:
-
Turbo speed for greater security and convenience.
-
Very easy to install and set up, saving you time and money.
-
Reliable battery backup.
-
Dedicated Solar Mode – allows you to disable the Mains Fail buzzer when using solar power.
-
Onboard multichannel CENTSYS receiver.
-
Multiple Modes of Operation.
-
Adaptive Collision Sensing.
-
Modular components clip together for easy maintenance.
-
Lockable, easy Manual Override.
-
Now with robust steel pinion – can be easily retro-fitted and ensures reliable operation.
Description
D2 TURBO TECHNICAL DATA:
| DESCRIPTION | |||
|---|---|---|---|
| Technical Data | D2 Turbo | D2 Turbo Low-voltage | |
| Input voltage 1 | 90V– 240V AC ±10%, 50Hz | 10V – 20V AC ±10%, 50Hz; 10V – 28V DC | |
| Motor voltage | 12V DC | 12V DC 3 | |
| Motor power supply 4 | Battery-driven (standard capacity – 12V 5Ah) | Battery-driven (standard capacity – 12V 5Ah) | |
| Current consumption (mains) | Intergral with controller 1A @ 13.7V +/- 1% | Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC) | |
| Current consumption (motor at rated load) | 8/12A | 8/12A | |
| Current consumption (quiescent load) | 95mA | 95mA | |
| Operator push force | |||
| Starting | 18kgf | 18kgf | |
| Rated | 8kgf | 8kgf | |
| Gate mass – maximum | 250kg | 250kg | |
| Gate length – maximum | 20m | 20m | |
| Gate speed – m/min 6 | 22 – 26m/min | 22 – 26m/min | |
| Gate speed – mm/sec | 367 – 433mm/sec | 367 – 433mm/sec | |
| Drive Pinion | 17T Module 4 | 17T Module 4 | |
| Maximum daily cycle | 10 cycles/day | 10 cycles/day | |
| Design life | 30 000 cycles | 30 000 cycles | |
| Operations in standby with standard battery 4, 5 | |||
| Half day | 60 cycles | 60 cycles | |
| Full day | 40 cycles | 40 cycles | |
| Collision sensing | Electronic | Electronic | |
| Operating temperature | -15°C to +50°C | -15°C to +50°C | |
| Degree of protection | IP54 | IP54 | |
| Controller incorporated | D2 Controller_H | D2 Controller_L | |
| Onboard receiver type | NOVA code-hopping onboard, multichannel | NOVA code-hopping onboard, multichannel | |
| Receiver frequency | 433.92MHz | 433.92MHz | |
| Receiver code storage capacity | 32 transmitter buttons | 32 transmitter buttons | |
| Mass of unit packed | 5kg | 5kg | |
| Packaging dimensions | Length: 255mm x Width: 188mm x Height: 333mm | Length: 255mm x Width: 188mm x Height: 333mm |
[*] – Can operate off a solar supply, consult CENTSYS for assistance. [**] – A larger 7Ah battery can be used for longer standby times. [***] – Can be configured.
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
CENTSYS SMART PowerPack
The 24V DC SMART Power Pack was developed to complement CENTSYS 24V gate operators and is ideal for high-traffic sites that demand a higher duty cycle than battery-driven operators can provide. Since the SMART Power Pack operates a rated gate directly off the mains power, there’s no need to ensure battery capacity for handling the increased duty required at busy sites. It’s also the perfect solution for locations where battery backup isn’t necessary, thanks to stable grid power or alternative solutions like solar or generators, ensuring uninterrupted power supply to the operator.
For added flexibility, the SMART Power Pack can be configured to use batteries for backup in cases where mains supply may be unstable. This setup allows for a higher duty cycle when mains power is available, while still enabling gate operation during power interruptions.
The SMART Power Pack also supports higher-capacity batteries, with an adjustable charge rate that can be easily configured through the MyCentsys Pro mobile app. Additionally, the Power Pack features a built-in charger, eliminating the need to purchase an external unit, resulting in cost savings while enhancing the overall convenience and efficiency of this power solution.
CLAWS – ROADWAY SPIKES FOR HIGH-SECURITY ACCESS CONTROL
HIGH-SECURITY, HIGH-VOLUME ROADWAY ACCESS CONTROL
Give your traffic barrier CLAWS – an effective deterrent for high-volume traffic control. Designed to provide a compelling reason for would be criminals to reconsider their approach; CLAWS are constructed to take a beating but never miss a beat of their own. CLAWS are available in four different configurations. These can be generally divided into two types of categories: Flush Mount models for installations that are flush with the roadway surface, and Surface Mount models for installations that are mounted above the roadway surface. The Flush Mount models are ideal for installations that require seamless traffic control for smooth-flowing traffic, whereas the Surface Mount models are mounted above the general surface of the roadway and create a traffic calming bump, slowing traffic for a safer access control point. Both the Flush Mount and Surface Mount models are available in either Direct Drive which utilises the SECTOR barrier’s drive mechanism, or Independent Drive models which have their own drive mechanism and controllers.MODELS:
- CLAWS Surface Mount models – For installations that are mounted above the roadway surface.
- CLAWS Flush Mount models – For installations that are flush with the roadway surface.
Both the flush mount and surface mount models are available in either Direct Drive which utilises the SECTOR’s drive mechanism, or Independent Drive models which have their own drive mechanisms.
G-ULTRA – The ultimate GSM solution
With the G-ULTRA, your entire world fits into the palm of your hand, giving you complete control at your fingertips. This is the evolution of GSM technology, designed to offer you the ultimate flexible, mobile-based access control and monitoring solution and allowing you to transcend archaic notions of what GSM can achieve.
Unbridled. Unchained. Unmatched. Ultra.
Main features:- Monitor up to four electrical devices by receiving push notifications
- Use the outputs to control up to six devices from your phone (two additional onboard relays)
- Intelligent monitoring of CENTSYS gate motors’ status outputs (for example gate opening, gate left open, etc.)
- Suitable for a wide variety of access automation applications
- Time-barring and visitor control – ideal for B & Bs and guesthouses
- LCD screen for easy access to diagnostics
- Instant activation via G-REMOTE mobile app
- Easy setup via G-WEB PLUS online interface
MIDI TRAFFIC LIGHT
THE CENTURION MIDI TRAFFIC LIGHT
If you’re tired of having your traffic barriers driven through or your gates crashed into, it’s probably time for something a little more – shall we say – familiar. And if you’re a city dweller – or if you’ve ever been in a motor vehicle, for that matter – what can be more familiar than a traffic light?
The CENTSYS Midi Traffic Light is a highly effective traffic control solution that interfaces seamlessly with virtually any automated system including our SECTOR/SECTOR II high-volume traffic barrier and CLAWS roadway spikes; it provides visual indication to vehicles of when it is safe to proceed into or out of an access controlled area (you know, without mutilating their tyres).
A collection of high-quality LEDs ensures that the output states – red or green – are clearly visible in both bright and low-light conditions, and we’ve even pre-wired an interface relay for you to save you the effort.
So easy is the CENTSYS Midi Traffic Light to install that we wouldn’t be surprised if you fitted one to control your household’s shower schedule in the mornings!
This (literal) beacon of light is available in two configurations, namely Pedestal Mount for fitting onto traffic barriers, and Wall Mount for use with pretty much any other automated system.
NOVA HELIX – CODE-HOPPING RECEIVERS
NOVA HELIX is a range of single- and multichannel radio receivers incorporating secure code-hopping technology. The NOVA HELIX system offers both link and master learning capabilities to provide the user with the ultimate in usability and security and the technology inherent in all NOVA HELIX receivers ensures that the functionality goes well beyond the scope of standard receivers, literally putting unsurpassed convenience at the user’s fingertips. In addition, the system supports backward compatibility with the NOVA range of transmitters, meaning that there is no need to purchase additional equipment if presently making use of NOVA.
SECTOR II – HIGH-VOLUME INDUSTRIAL TRAFFIC BARRIERS
Introducing the heir to the throne of high-volume vehicular access control. With an updated look that perfectly matches its superior performance, an optimised design for the ultimate in ease of installation and boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution.
* NEW *
Our redesign of the boom pole to a rectangular profile not only enhances the visual appeal of the barrier, but also improves its strength and durability. The easy-to-attach LED strip is seamlessly integrated with the barrier’s logic, providing a clear indication for drivers when it is safe to proceed. The updated pole adds to the long-term performance of the barrier and makes the operator smart-looking and eye-catching, while the LED strip provides much safer traffic management and greater peace of mind not only for the installer, but for everyone using and managing the premises. A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance, placing the SECTOR II high-volume traffic barrier in a class by itself.
SMARTGUARD – HARD-WIRED ACCESS CONTROL KEYPAD
The SMARTGUARD keypad can accommodate up to 1000 unique PIN codes with any user-defined length from one to ten digits. There are three separate outputs, each configurable to either latching or non-latching. Such functionality caters for many different scenarios for example, a motorised gate entrance may be opened fully using one code, activate the pedestrian opening using another, and switching on the house alarm using a third. User codes can also be selectively deleted without affecting other codes stored in the memory. The keypad also boasts a “downcounter” allowing select codes to have a limited number of uses. This is ideal for granting single occasion access, for example to an armed response company with the code deleting itself after use. The addition of the CENTSYS SmartSwitch maximises security and ensures that even with the keypad mounted outside the property, it cannot be “hotwired” and the integrity of the site jeopardised. The same memory module used on the SupaNOVA may also be used on the SMARTGUARD access control keypad, allowing all the settings and codes to be backed up and restored in seconds.
Reviews
There are no reviews yet.